BSEN60893-3-7-PIGC301 B34 Polymide Glass Laminate SRBG

Material Details

Grade:B34
Description: Polyimide Glass. High temperature high strength
Comments:High temperature, high performance laminates developed for applications where good dimensional stability, electrical / mechanical strength and rigidity are required at elevated temperatures. Capable of long-term use at 200 deg C and intermittent use at higher temperatures.
Specifications:BSEN60893-3-7-PIGC301 (Which supersedes BS3953 PI1).
Body Colour:Dark Brown
Cover Colour:Dark Brown
Finish:Matt
Size:1220 x 1220
Thickness Range: 0.4 - 100.0

Typical Applications

  • Chemical Resistance Components
  • High Temperature Components
  • Jigs and Fixtures
  • Mechanical Applications
  • Precision Machined Parts
  • Slot Wedges
  • Thermal Splash Barriers
  • Welding Jigs

General Properties

Property Unit of measure Typical Value
Densityg/cm32
Water Absorptionmg34
Flammability Category¥--FV0
¥ Where relevant, the flammability test method is used solely to control and monitor consistency of production. Under no conditions should the results be considered in relation to fire hazards under actual conditions of use.

Electrical Properties

Property Unit of measure Typical Value
IR (24hrs Water Immersed)G Ω6000
IR (Dry)G Ω6000
Electric Strength (Flat Rapid)MV/m15
Breakdown Voltage (Edge Step by Step)kV92
Relative Permittivity @ 1 MHz--5.4
Dissipation Factor @ 1 MHz--0.025
Tracking IndexV165

Mechanical Properties

Property Unit of measure Typical Value
Flexural StrengthMPa540
Flexural Strength at 150°CMPa350
Tensile StrengthMPa350
Impact (Notched CHARPY)kJ/m280

Thermal Properties

Property Unit of measure Typical Value
Thermal Rating Continuous°C200
Thermal Rating Intermittent°C250

Disclaimer: The above values are based upon routine test data and do not form the basis of a supply contract. These products may be used in a diverse range of applications and whilst every effort is made to ensure the information in this data sheet is accurate, it must be stressed that it is the user’s responsibility to ensure suitability for the intended end use.