Industrial Laminates | Machined Components | Tubes & Rods

BSEN60893-3-2-EPGC202 B38 Epoxy Glass Laminate SRBG

Material Details

Grade: B38 (FR). (Type: Glass Based Laminates - SRBG)
Description: Epoxy Glass. Flame retardant epoxy glass laminate
Comments: Flame retardant Epoxy glass laminate. Class B applications incorporating a brominated resin system. Very good electrical, mechanical and machining characteristics. For all electrical and electronic applications.
Specifications: BSEN60893-3-2-EPGC202 (Which supersedes BS3953 EP4). The closest NEMA equivalent to this specification is NEMA FR4.
Body Colour: Pale Green
Cover Colour: Pale Green
Standard Finish: Satin/Glossy
Size: 1220 x 1220 Thickness Range: 0.4 - 175.0 †

Typical Applications

  • Transformer Spacers
  • Terminal Boards and Tag Strips
  • Slot Wedges
  • Precision Machined Parts
  • Pipeline Insulation
  • Phase Barriers
  • Insulating Bushes Spacers Sleeves
  • High Voltage Insulation
  • Electromagnetic Coil Insulation
  • Chemical Resistance Components

General Properties

Property Unit of measure Typical Value
Density
g/cm3
1.9
Water Absorption
mg
7
Flammability Category¥
-
FV0

¥ Where relevant, the flammability test method is used solely to control and monitor consistency of production. Under no conditions should the results be considered in relation to fire hazards under actual conditions of use.

Electrical Properties

Property Unit of measure Typical Value
IR (24hrs Water Immersed)
G Ω
30000
IR (Dry)
G Ω
30000
Electric Strength (Flat Rapid)
kV/mm
16
Breakdown Voltage (Edge Step by Step)
kV
89
Relative Permittivity @ 1 MHz
-
4.8
Dissipation Factor @ 1 MHz
-
0.02
Tracking Index
V
210

Mechanical Properties

Property Unit of measure Typical Value
Flexural Strength
MPa
492
Tensile Strength
MPa
220
Impact (Notched CHARPY)
kJ/m2
55

Thermal Properties

Property Unit of measure Typical Value
Thermal Rating Continuous
°C
130
Thermal Rating Intermittent
°C
140

Disclaimer: The above values are based upon routine test data and do not form the basis of a supply contract. These products may be used in a diverse range of applications and whilst every effort is made to ensure the information in this data sheet is accurate, it must be stressed that it is the user's responsibility to ensure suitability for the intended end use.