Industrial Laminates | Machined Components | Tubes & Rods

BSEN60893-3-2-EPGC201 G10 Epoxy Glass Laminate SRBG

Material Details

Grade: G10. (Type: Glass Based Laminates - SRBG)
Description: Epoxy Glass. Commercial epoxy grade
Comments: General purpose Epoxy glass laminate. Temperature class B (130 deg C), with good mechanical and electrical properties at moderate cost. See also B46.
Specifications: BSEN60893-3-2-EPGC201 (Which supersedes BS3953 EP3). The closest NEMA equivalent to this specification is NEMA G10.
Body Colour: Green
Cover Colour: Green
Standard Finish: Satin/Glossy
Size: 1220 x 1220 Thickness Range: 0.4 - 150.0 †

Typical Applications

  • Transformer Spacers
  • Terminal Boards and Tag Strips
  • Slot Wedges
  • Precision Machined Parts
  • Pipeline Insulation
  • Phase Barriers
  • Insulating Bushes Spacers Sleeves
  • High Voltage Insulation
  • Electromagnetic Coil Insulation
  • Cryogenic Resistance Components
  • Chemical Resistance Components

General Properties

Property Unit of measure Typical Value
Density
g/cm3
2
Water Absorption
mg
8

¥ Where relevant, the flammability test method is used solely to control and monitor consistency of production. Under no conditions should the results be considered in relation to fire hazards under actual conditions of use.

Electrical Properties

Property Unit of measure Typical Value
IR (24hrs Water Immersed)
G Ω
17000
IR (Dry)
G Ω
17000
Electric Strength (Flat Rapid)
kV/mm
15
Breakdown Voltage (Edge Step by Step)
kV
80
Relative Permittivity @ 1 MHz
-
5.2
Dissipation Factor @ 1 MHz
-
0.025
Tracking Index
V
210

Mechanical Properties

Property Unit of measure Typical Value
Flexural Strength
MPa
485
Impact (Notched CHARPY)
kJ/m2
60

Thermal Properties

Property Unit of measure Typical Value
Thermal Rating Continuous
°C
130
Thermal Rating Intermittent
°C
140

Disclaimer: The above values are based upon routine test data and do not form the basis of a supply contract. These products may be used in a diverse range of applications and whilst every effort is made to ensure the information in this data sheet is accurate, it must be stressed that it is the user's responsibility to ensure suitability for the intended end use.