Industrial Laminates | Machined Components | Tubes & Rods

BSEN60893-3-2-EPCC301 B42 Epoxy Cotton Laminate SRBF

Material Details

Grade: B42. (Type: Fabric Based Laminates - SRBF)
Description: Epoxy Cotton. Anti-tracking, easy to machine
Comments: Fine weave cotton epoxy laminate. Can be easily machined to a fine finish with good anti track properties, coupled with high mechanical and electrical strength.
Specifications: BSEN60893-3-2-EPCC301 (Which supersedes BS2572 F6).
Body Colour: Cream
Cover Colour: Cream
Standard Finish: Satin/Glossy
Size: 1220 x 1220 Thickness Range: 0.8 - 150.0 †

Typical Applications

  • Track Resistance
  • Slot Wedges
  • Seal Rings
  • Rotor Blades (compressor)
  • Precision Machined Parts
  • High Voltage Insulation
  • Gears - Medium Tooth
  • Gears - Fine Tooth
  • Chemical Resistance Components
  • Busbar Supports

General Properties

Property Unit of measure Typical Value
Density
g/cm3
1.35
Water Absorption
mg
55

¥ Where relevant, the flammability test method is used solely to control and monitor consistency of production. Under no conditions should the results be considered in relation to fire hazards under actual conditions of use.

Electrical Properties

Property Unit of measure Typical Value
IR (24hrs Water Immersed)
G Ω
6
IR (Dry)
G Ω
6
Electric Strength (Flat Rapid)
kV/mm
15
Breakdown Voltage (Edge Step by Step)
kV
70
Tracking Index
V
>600

Mechanical Properties

Property Unit of measure Typical Value
Flexural Strength
MPa
190
Tensile Strength
MPa
80
Impact (Notched CHARPY)
kJ/m2
9.2

Thermal Properties

Property Unit of measure Typical Value
Thermal Rating Continuous
°C
130
Thermal Rating Intermittent
°C
145

Disclaimer: The above values are based upon routine test data and do not form the basis of a supply contract. These products may be used in a diverse range of applications and whilst every effort is made to ensure the information in this data sheet is accurate, it must be stressed that it is the user's responsibility to ensure suitability for the intended end use.